On 15 October 2022, Zongwei Cube officially released the new Anycubic Photon M3 Premium, opening up the era of 8K ultra-high precision printing. Anyone who knows 3D printing knows that high precision is the core advantage of light-curing printers, and only by breaking through technical bottlenecks can we continuously improve precision and present details better. As a pioneer in the light-curing industry, Zongwei Cube has always been at the forefront of the industry’s scientific research strength. …has gained the attention of many 3D printing enthusiasts with its many highlights.
Black light source technology, no loss of detail
As we all know, the core issue of light curing technology is the solution to the light source problem, the new Anycubic LighTurbo 2.0 technology equipped with the COB light source solution retains the advantages of high light uniformity, and the innovative design of the curved reflection to the exposure screen to convert the light into nearly collimated light, so that less stray light is generated, and finally get a uniform light beam, effectively improving the light uniformity, collimation and light scattering coefficient. This results in a uniform beam of light, effectively improving the light uniformity, collimation and astigmatism. The Anycubic LighTurbo 2.0 technology is the best light source technology solution available. A good horse needs a good saddle, and with the excellent 8K monochrome LCD screen, it can fully realize the excellent effect of not losing details in large size printing, and print models with higher and more uniform details than other mainstream 8K products on the market!
Anycubic Photon M3 Premium adopts a smarter dual heat dissipation system to keep the light source environment within 65°C through a combination of hardware and software, effectively enhancing the life of the light source. The intelligent temperature control system intelligently adjusts the fan speed according to the temperature of the light source. The large heat sink fins are designed to quickly disperse heat to the air outlet for efficient heat dissipation.
10″ monochrome screen with 8K resolution
In the field of 3D printing, the accuracy of the machine determines a large degree of user experience. The Anycubic Photon M3 Premium features a 10″ monochrome LCD screen with a HD resolution of 7680×4320 and 28.5μm pixels on the horizontal axis, an increase of 216% and 40% respectively compared to the Anycubic Photon Mono 4K, and with a high contrast ratio of 380:1, the printed models are with sharp angles and fine edges, bringing out the best in detail.
6.7L large size, more freedom to create “smart”
In terms of print size, common light-curing 3D printers in the market are plagued by the need to split large models into multiple pieces for production. The Anycubic Photon M3 Premium is capable of printing models up to 250219123mm in one go, with a maximum print volume of 6.7L, the size of 24 250ml bottles of milk. The increased build size allows this new product to further exploit the advantages of 3D printing in one piece, allowing creative masterpieces to be produced in one go.
Dual linear guide ball screws for speed and precision
The Z-axis of the Anycubic Photon M3 Premium uses a dual-line guide ball screw, which uses the rolling friction principle, resulting in less resistance to platform lift and faster printing than the sliding friction of a traditional T-shaped screw, with the fastest print speed reaching 95mm/hour and saving approximately 2.5 hours on 12cm models compared to other 8K products.
In addition to the speed, the screw also has a great impact on the accuracy. Compared to T-screws, the printing platform under the ball screw structure has a higher accuracy in the Z-axis lifting, which can reach 0.005mm, and the Z-axis accuracy is doubled compared to T-screws, which can effectively eliminate the layer pattern.
Intelligent cloud platform, all in one click
Based on market insight and to meet users’ demand for more efficient 3D printing, the Anycubic Photon M3 Premium is equipped with the new generation of the Zongwei Cloud Platform (to be launched in Q1 2023), which enables remote intelligent printing via the APP, as well as real-time monitoring of printing progress and adjustment of printing parameters. No need to go through long hours, you can control the printing progress remotely, and there are 2W+ quality models at your disposal.
Efficient purification, natural breathing
The Anycubic Photon M3 Premium features an air purifier with built-in high-density activated carbon, a dual air purification system and a symmetrical dual air inlet design that increases the air inlet and outlet area by 1.5 times, improving air purification efficiency and removing over 80% of odours within 10 minutes, creating a cleaner printing environment.
Bigger troughs for continuous printing
The Anycubic Photon M3 Premium has a 60% larger capacity than other 8K products in its class (20mm higher height), eliminating the need to repeatedly add resin to print large models. The use of NFEP release film makes it easier to detach the model compared to traditional FEP release film, increasing the print success rate by 10%.
As a well-known 3D printing technology brand, Zongwei Cube always sticks to the core of user experience, maintains the original intention of vigorous research and innovation, and is committed to bringing users a more extreme and cutting-edge technology experience, leading the 3D printing industry to more technological and innovative development. The new product has once again proved its leading position in technology research and development to the industry, and is now available on Tmall and Jingdong.